Orgonites DIY.
Orgonite: A proven effective solution.
Quick Facts About Orgonite:
- Simple. Easy to make. Works continuously.
- Turns negative energy into positive energy.
- Purifies the atmosphere, detoxifies water, ends drought.
- Helps plants grow better, repel pests & require less water.
- Mitigates harmful effects of EMF radiation.
- Disarms and repels predatory forms of life.
- Inspires a pleasant demeanor and balanced, happier moods.
- Frequently remedies insomnia and chronic nightmares.
- Helps awaken your innate psychic senses.
How to Make Orgonite
Overview
Basic orgonite is simply fiberglass resin, metal shavings and a quartz crystal, cured in any mold you like. There’s no one “right” shape or size for orgonite, and its range of effect seems to scale linearly with volume, but there are specific, time-tested, widely-used and repeatedly-confirmed effective designs for both personal and field devices which have grown and continue to grow out of the steadfast work of talented and dedicated gifters from around the world. These designs comprise the basic tools of the orgonite gifter as discussed on numerous orgonite Web boards and offered pre-made by many reputable orgonite vendors.
What You’ll Need
Metal Shavings: You don’t want fine metal filings, nor do you want large pieces of metal. Quarter-inch-wide aluminum curls are very common and very effective for use in orgonite, but any kind of copper, iron, brass (including brassed aluminum), bronze, nickel or even steel shavings will work fine. Just bring a bucket and some work gloves to a local machine shop and ask them if you can fill your bucket with metal shavings. Before giving them to you for free, they will probably ask you what it’s for (typically more out of curiosity than anything), so why not tell them? If you don’t feel comfortable explaining orgonite to them, simply tell them about this site, or give them the simplest honest answer you can, such as a “public service,” “art project,” or even “science experiement”. However, you may be surprised what people will understand if you take the time to explain it meaningfully and from the heart.
Quartz Crystals: Any funky, ugly, smokey pieces of quartz will work perfectly for orgonite field devices. You can usually find this grade of quartz crystal very inexpensively at most decent gem and mineral shops, or you can buy quartz online from orgonite-aware vendors at appropriate sizes and grades.
Fiberglass/Epoxy Resin: The most expensive component of orgonite, typically retailing for US$18-$25/gallon at marine supply stores and hardware stores. Any kind of organic resin will work fine, but liquid resin (as opposed to “body fill” paste) has been found to be easiest to work with for creating orgonite. Resin requires a chemical additive called a hardener, typically included if purchased by the gallon, in order to catalyze the curing (hardening) process, which may take from mere hours in hot, arid weather to multiple days in wet, cold weather.
Molds: This depends on the specific type of orgonite device you wish to create, but any mold which can withstand boiling temperatures should work fine. Avoid plastics unless they are oven-safe, as the chemical reaction which occurs during the catalyzation process heats the resin to temperatures which can easily melt normal plastics. Generally, metal molds seem to work best for most purposes, but cheap field devices can also be made from large paper bathroom cups or paper sno-cone cups. Use your imagination!
Other Stuff: You will want a mixing container such as a bucket (preferably with a pouring lip), a wooden stirring stick, some old rags or paper towels for splashes and spills, and a large, flat surface for leaving the orgonite to cure.
Safety: Organic resins emit toxic fumes before and during the curing process, so working in a well-ventilated area such as a backyard or porch/deck is ideal. You may also want to use protective gloves and wear clothing you don’t mind getting catalyzed resin splashed on, as it will go everywhere, especially your first few times pouring. Putting down a tarp first can help tremendously with cleanup, as the hardened resin should pop right off the tarp. http://www.orgonite.info/how-to-make-orgonite.html
Vendors where you can buy beautifull organite products:
North America:
Myth N Lynx Gemstones/Crystals
- (Neodymium Magnets)
Africa:
Australia & New Zealand:
- (New Zealand)
Iceland:
Italy:
United Kingdom:
What Else You Should Know Extract from http://www.orgonite.info/how-to-make-orgonite.html
There are those of us involved with this “gifting movement” who believe that the proliferation of electromagnetic pollution, cellphone towers and chemtrails are not an accident, but are intentional acts of malfeasance by the parties who seek to benefit or profit from inflicting illnesses upon the populace. We don’t ask that you believe us, or subscribe to our beliefs. What we do ask is that you help combat the pollution that is wreaking so much harm throughout our communities around the world. We ask you to contribute to the health and well-being of your friends, family and neighbors by following the simple steps outlined on this site, regardless of whether you agree with our personal opinions and convictions. We ask that you follow the instructions here and seek your own personal confirmation of the effectiveness of orgonite.
This is not a joke, or a game, or an advertisement. This is not a business opportunity. We don’t want your money. Orgonite vendors exist only to serve those who are not able to or interested in making orgonite themselves. Orgonite does not require belief or conscious intention in order to work. This is not a religion, a cult, or a product of disinformation of any kind. This has nothing whatsoever to do with the “newage movement.”
We have found that tactical deployment of orgonite (e.g., “gifting”) by throwing, hiding or burying it near sources of electromagnetic radiation or other pollution or in polluted areas, such as near cellphone/TV/radio towers, power plants, in lakes, rivers and ocean harbors, has a powerful and noticeable effect on the area. The skies get clearer and return to the deep blue color you remember from your childhood, complete with normal puffy white clouds. Water pollution levels decrease precipitously, as documented in Toronto, Ontario. Drought conditions are reversed, as documented in South Africa and in Death Valley, California. The general mood or “vibe” in the area improves dramatically as people are kinder, happier and more easy-going. Neighbors either become friendlier or suddenly leave town. A renewed sense of hope begins to pervade the community. We have seen this effect in our own communities as a direct result of tactical orgonite gifting, and have found it truly self-empowering, but don’t take our word for it. Try it yourself and see what happens!
Latest posts by Leanne (see all)
- Emotional and Mental Health using Essential Oils and Aromatherapy - July 29, 2016
- Why healing your emotional body is the best thing you could do for yourself… - February 18, 2016
- Power Balls – The Easiest Healthy Snack - January 5, 2016
I know this thread was posted years ago, but I’m hoping to still receive a response as I’m having trouble finding reliable information or rather, I’m not sure what out there is reliable, but from reading here this matches with what I know to be true so, I trust it. That being said, how do I know what resin is organic and what isn’t? What are the types of resin that are organic? Thank you in advance. š
I also am not sure about the “strength” of orgonite make with painstakingly cut up metal pot scrubbers. I sure HOPE they are good and strong. any constructive “input” would be greatly appreciated. My email address is listed below. Thank you, Leanne.
It isn’t as easy as you think it is to find good inexpensive metal shavings these days. Oh the BIASES that exist in society today!!! Don’t even get me STARTED on just 10 percent of them!!! That alone would take ALL DAY!!! Sadly, the main theme of the human race today is “PARANOIA!!!”
But ever since the Oklahoma City bombing and 9-11 ( and all of the similar bombings ), everybody has been majorly uptight and butt-anal when it comes to creeps and perceived “bomb makers.” But this broad brush stereotype mostly paints MEN. For example: If you are a woman, and you go to a machine shop and ask for metal shavings, you will more than likely be viewed as an “artist” who is acquiring materials for an art project. But if you are a male, and you go to a machine shop and ask for their metal shavings, you will probably be viewed as a “potential TERRORIST” who is trying to garner SHRAPNEL!!!
I bet that before the Oklahoma City bombing and 9-11, machine shops used to bag and SELL their metal shavings for just a few dollars a pound!!! ( That would help raise extra money for machine repairs and maintenance. ) But not anymore, Jack! The last time I got all cleaned up and went and tried to acquire metal shavings that way, the workers and business managers all looked at me with extreme suspicion and asked me what in the world ” I ” was needing those metal shavings for. ??? Then they said “NO, we send our metal waste to recycling centers. They PAY us for our metal waste.” So I said I would be willing to BUY it from them. That’s when they REALLY got suspicious and told me to …”GET THE F–K OUT OF HERE!!!” I’m sure my frustrating experiences there are certainly not unusual. That’s the treatment I ended up getting at the few remaining metal shops that exist in my state, the “Sheeple’s Socialist Republik of Kalifornia!!!” NAFTA really did it to us!!! Most of our nation’s manufacturing jobs ended up going overseas ( globalism 101, baby!!! Result: Millions of otherwise prosperous workers lost their incomes as well as their “livelihoods!!!” ) And the few metal shops I was able to find did not trust me for NOTHIN’!!! I wouldn’t be surprised if the metal shops were cautioned by Law Enforcement against giving their waste to potential “bomb makers.” So, ….
After hitting that wall ( just a coinsidence that I seemed to be under police surveillance for about a month following my visit to those machine shops? I think NOT!!! ), I realized I was going to have to make my OWN metal shavings. But I wisely waited for awhile, until the cops seemed to take their watchful eye off of me.
The metal shavings sold online are just too expensive for “po-boys” like ME to afford. ( The resins are more than costly enough.) SO, I decided to use shredded aluminum turkey roasting pans. My cross-cutting paper shredder works quite well for that. Then I have to spend time cutting up steel, brass, and copper pot scrubbers. This is hard and PAINFUL on my rapidly aging hands!!! My hands SUCK!!! I have trigger finger ( an excruciatingly PAINFUL condition that usually afflicts people in their 70s and 80s – yeah,.. LUCKY ME!!!! ) and arthritis. Tin snips work, but they only open up a little pinch. I’ve had to resort to using heavy duty scissors, instead. There are actual metal shredding machines out there, but good luck actually GETTING one!!! Most of them are the size of automobiles at the smallest!!! There are a few really good miniature metal shredders what would be PERFECT for this job,… HOWEVER!!!
1. These mini metal shredding machines are so dangerous that I bet there is some sort of federal or state law banning their sale to individual civilians, and
2. There are only 2 companies that produce these mini metal shredders, and though they seem friendly on their websites, they are actually very HOSTILE to the paying public!!! I.e. They only sell to BUSINESSES, CORPORATIONS and FACTORIES!!! You have to be able to PROVE that you possess the papers, documents, and business licenses to own and operate any one the machines you acquire from them!!! You probably also have to buy a minimum of TEN, at a cost of about $1,200.00 EACH!!! One in particular is a company called UNTHA International. They even want to know what TYPE of business you own ( C.E.O’s ONLY, no “lackies!!! ). This is obviously to ensure that no “retailers” can get their hands on their products!!! All that just to make sure that their shredders are carefully kept out of public hands!!! Are the people at UNTHA International total jerks? You darn well better BELIEVE it!!!
I called them. The salesman spoke with a sharp Iranian accent, had all the patience of a pissed off taxi cab driver, and was highly annoyed that I had wasted his valuable TIME!!! He treated me like I was a total IDIOT, told me not to call again, and hung up on me!!! I thought that maybe if I called them, I could make some kind of “deal” with them. NOPE!!! The operator and salesman was all like,… “what part of “BUSINESSES ONLY” don’t you understand!?!?”
Your results will more than likely be the same. Don’t bother. They’ll just treat you like shit and hang up on you, too. Besides, they may ALSO have been schooled by the authorities on the potential for their shredders to be used for the purpose of making “shrapnel.” The other company that sells a similar mini metal shredder ALSO says “COMPANIES ONLY.” It’s one of the mandatory “requirements” on BOTH companie’s online ordering web pages. No point in calling them, either. And again, It may be against the law for such dangerous machines to be sold to the public. ( A “schedule II” controlled substance??? ) And I have NO idea where to get the parts ( if a person can even GET the parts ) to build my OWN metal shredder.
So, here I am, ( bad-luck Charlie Brown ) hurting my poorly aging hands cutting up these copper, steel and brass pot scrubbers!!!!! It wouldn’t be so bad if only my hands were strong, smooth skinned and durable like they USED to be!!! But I guess I’ll just have to be a tough old stalwart and keep cutting away at those pot scrubbers.
A metal lathe is also a great way to get metal turnings, shavings and bits, but the machine is expensive as are the metal round stocks, which don’t even come “tapped”, so they can be placed on the spindle!!! I’ll have to take the metal rounds to a machine shop so I can get them “tapped!!” Oh, and the metal round stocks ain’t exactly “cheap!!!”
I guess that this is the life of a true “Jedi!!!” Luke Skywalker will no doubt be an avid orgonite maker as it clearly curtails the Darkside. But he probably won’t be born for another 1,600 years!!! Light sabers won’t be invented for probably another 6,510 years!!! But we do have ORGONITE!!!
If you have a better way to cut up metal pot scrubbers, please let me know. I can be reached at redredmane719@gmail.com . Thank you so much.
Wouldn’t gold and silver work better then most metals?
Hi,
Happy Friday!
I am a regular follower of your website and honestly, you have been a lighthouse of inspiration!
By the way, I am Jennifer Dsouza and I am a medical professional who has an undying love towards writing and empowering people with information about natural health and lifestyle. I am perpetually on the lookout for a professional website to share my knowledge and I thought it would be amazing if I have an opportunity to empower your blog readers from my professional perspective.
On my part, I assure you a high-quality content that is
100% unique
Relevant to your audience
Insightful and professionally written
And also happy to write on any topic on your suggestion
Let me know what you think. Iām excited to hear back from you!
Thanks
Jennifer
Thank you so much for your information about orgone. Keep sharing, doing a great job!
Hi Leanne. I just have one question: They say that curing your orgonite in sunlight is best as it positively charges the pieces. Problem: most of my orgonite ends up being made in the wintertime. This always seems to be the case with me. Even in the January sunlight, it is no warmer than 64 degrees outside. It would take DAYS for epoxy to cure at that temp. Polyester smells so bad that I just can’t use it. So for me, it’s epoxy.
Anyway, this leaves me with no alternative but to pour indoors, where I can control the room temp. So I have multiple lights hanging over the pour table, each at least 100 to 200 watts. I also have an LED bulb, a bright blue fluorescent bulb and one black-light ( for the U.V. Element. ) Trying to simulate sunlight is an interesting endeavor, believe me. A also play music to the time of frequency 528 hz. while giving the orgonite ‘love.’ As far as I know, that’s the best a person can do. Any input would be greatly
appreciated. Just e-mail me at redredmane719@gmail.com. Thank you.
Thanks for the article, I’m looking into making some. Do you know anything about the different colors, is some kind of dye used?
Hi Amora the options are really endless you can use any kind of dye or even mica. Have fun!!
Thanks, me too!
I’m going to take your advice on how to make it and research areas of problems and place some orgonite I made from good intentions also I’m going to make and gift my neighbors with your explanation of orgonite. Peace and blessings. I feel good about this. I believe I’ve found some of my purpose, my heart is racing and I feel amazing! ?. GRATITUDE
Hi, this is Lisa Scurlock. Thank you so much for your information about orgone. I am going to make my own. I have been looking for a way to serve the planet, and you have gave me some great idea’s. Thanks again.
Love and Light to all. š
Thank you Lisa it is a pleasure I am glad you liked it, you just gave me an idea too….(-;